TruBlend® (ABS - Magenta)

80USD
Write a Review
SKU:
3PFABS1KG175MAG
Weight:
1.30 LBS
Shipping:
Calculated at Checkout

BLACK FRIDAY SALE -> $10 off per KG !!!
You need a 3D printer to use this material. Check out our Original Prusa i3 MK3 Black Friday Sale!

 

1kg of Magenta TruBlend® ABS 1.75mm 3D printer filament.

This is high performance material for full color spectrum blending on FDM/FFF 3D printers. Colors from the TruBlend set are designed to work together to blend and make new correct colors. Compatible with RoVa4D full color blending 3D printer. Also, works with Diamond hotends, Cyclops hotend, and similar multiple filament inputs with single output hotends, also works with standard multi-nozzle printers for single color printing. Colors combine to make new VIBRANT colors! Just like mixing molten paint together produces a new colors. If you mix our competitors filaments the result will be browns/greys and dull colors. Our colors are beautiful and bright. For example, if you mix MAGENTA with YELLOW in a 50/50 ratio the result will be RED. Or if mixed with CYAN in a 50/50 ratio the result will be BLUE. The raw materials used to make this 3D printer filament are the highest quality; the colors are the most pure so that the correct secondary colors will be made when combining during printing. This 3d printing filament is made in the USA not repackaged; TruBlend is actually extruded and spooled in Michigan by 3DxTech according to the specification of ORD Solutions Inc. We have done extensive testing with this material and compare to all other filaments and found that this is the best mixing filament in the entire global market. Our years of research have led us to make our own filament because we couldn't find an existing supplier that would work with our new printer the RoVa4D. It just so happens that in testing we found this material also works with other color mixing 3D printers. We invite you to indulge your 3D prints with our premium filament. Also, take a look at the other colors in the TruBlend filament set. These filaments work best when combined with other colors from the same set which includes Cyan, Magenta, Yellow, Black, White, and Transparent.

 

Our TruBlend filament prints perfectly on the Original Prusa i3 MK3 3D printer. Click here to visit the product page.

SPECIFICATIONS

Pantone color code: Process MAGENTA C

CMYKWT: C0 M100 Y0 K0 W0 T0

RGB: 217 1 122

Diameter: 1.75mm (+-0.025mm)

Color: Magenta

Material: ABS

Material weight: 1kg (2.2lbs)

Recommended printer settings:

                -nozzle temperature:230-240C

                - bed material/temperatures:

Kapton /120C / Squish

Geckotek / 80C / No Squish